Other

FAQ

The guillotine kneading machine is mainly composed of a guillotine blade in the front and a kneading cutter head at the tail. If you want to make the discharge smaller, remove the screw from the guillotine blade, move it forward and tighten it on. If you want to discharge larger, in addition to moving the guillotine blade backwards, you can also remove the blade and disassemble it one after another

Small machine models such as 3t, 3.5t, 4t, 5t, etc., generally use two electric 4.5KW motors.

The ingredients of the pellet machine are different animals and different growth periods,

Abnormal Noise Problem: Abnormal noise can be a signal that the pellet machine is malfunctioning, and it may be caused by loose, worn, or broken internal parts of the machine, etc. The solution to this problem is to inspect the individual parts of the machine and perform corresponding maintenance by following the following steps:
* Inspect the machine parts: When operating the pellet machine, check the various parts of the machine, especially the parts that are easy to wear, such as bearings, gears, etc.
* Carry out lubrication maintenance: Regularly lubricate and maintain the pellet machine to ensure that the lubrication status of each component is in good condition and reduce wear and friction.
* Check if there are foreign objects entering: During operation, pay attention to check whether there are foreign substances entering the pellet machine, such as metal fragments, stones, etc., and remove them in time to avoid them entering the machine.



Compression ratio problem: When operating a pellet machine, the compression ratio is an important parameter that directly affects the density and size of the particles. If the compression ratio is too small, it will cause the particles to be too loose and not easy to form; If the compression ratio is too large, the particles will be too compact, affecting ventilation and heating. The solution to this problem is to adjust the size of the compression ratio by following the following steps:
* Check whether the compression ratio is correct: First, check whether the compression ratio of the pellet machine is correct, if not, it needs to be adjusted to the specified range.
* Check the compression ratio adjustment device: If there is a malfunction, such as loosening or falling off, it needs to be inspected and repaired
* Clean and maintain the machine: If the compression ratio adjustment device is normal, then you need to check the other parts of the machine for blockage or wear, and clean and maintain it in time.

Particle plugging problem: Particle plugging is one of the common problems in the operation of pellet machine, which will cause the machine to fail to operate normally. There are many reasons for particle blockage, such as excessive moisture of raw materials and uneven particle size. The solution to this problem is to adjust the operating parameters and replace the corresponding parts by following the following steps:
* Check the humidity of raw materials: Before operating the pellet machine, check whether the humidity of raw materials is too large, if it is too large, it needs to be dried or dried.
* Check the feeding device: If the feeding device is faulty, such as clogged or falling off, it needs to be inspected and repaired.
* Adjust the operating parameters: If the feeding device is normal, then you need to check whether the operating parameters are correct, such as feeding speed, compression ratio, etc., if not, you need to adjust it in time.

Burning roller problem: Burning roller is one of the more serious problems in pellet machine operation, which can lead to machine damage and reduced production efficiency. There are many reasons for the burning of the pressure roll, such as the machine running too fast, the surface temperature of the pressure roll is too high, etc. The solution to this problem is to adjust the operating parameters and replace the corresponding parts by following the following steps:
* Check the running speed of the machine: When operating the pellet machine, check whether the running speed of the machine is too fast, if it is too fast, you need to adjust it.
* Check the surface temperature of the pressure roll: if the surface temperature of the pressure roll is too high

Coking problem: Coking is another common problem in pellet machine operation, which can lead to reduced machine heating efficiency and reduced pellet quality. There are many reasons for coking, such as unstable raw material quality, high heating temperature, wear and tear of internal parts of the machine, etc. The solution to this problem is to adjust the operating parameters and replace the corresponding parts by following the following steps:
* Check the quality of raw materials: Before operating the pellet machine, check whether the quality of raw materials is stable, if there are fluctuations, you need to make adjustments.
* Check the heating temperature: When operating the pellet machine, check if the heating temperature is too high, if it is too high, it needs to be adjusted.
* Inspect the internal parts of the machine: If the internal parts of the machine are worn or detached, such as burners, heat exchangers, etc., they need to be inspected and replaced

Patent certification
EU CE certification. ISO9001 certification

Solution

Don't know which machine to choose? Contact customer service to help you choose

  • 220v/380v
  • Multiple people working at the same time
  • Output per hour
  • Machine maintenance
Enquire now